德魯克PTX1400壓力傳感器產物概述：

德(de)魯克PTX1400壓強感應器器

PTX1400組合了GE從航空利用中成長的*手藝和多量出產中堆集的豐碩經歷，從而使產物具有了*的任務機能和有合作力的價錢。顛末完全彌補的變送器按DIN規范的壓力規模存于制品堆棧，可知足產業場所疾速發貨的請求。DRUCK負壓調(diao)節器器變送(song)器(qi)的特色是(shi)布局經湊堅忍(ren)，電路機能(neng)合適現場須要，持久丈量靠得(de)住性好，用戶頤養破費低(di)。

精 度： ±0.25% FS
量 程: （牢固量程，只能挑選以下規范量程挑選）
表 壓: 0～10kPa，25kPa，40kPa，60kPa，100kPa，160kPa，
250kPa，400kPa，600kPa，1MPa，1.6MPa，2.5MPa，
4MPa，6MPa，10MPa，16MPa，25MPa，40MPa，60MPa
絕 壓: 0～40kPa，60kPa，100kPa，160kPa，250kPa，400kPa，600kPa，
1MPa，1.6MPa，2.5MPa，4MPa，6MPa
復合表壓： -0.1MPa～+0.16MPa，-0.1MPa～+0.25MPa，-0.1MPa～+0.4MPa
大氣壓力：800mbar～1200mbar 絕壓
輸 出： 4～20mA（兩線）
任務溫度: -20～+80 ℃ （選用散熱器, 介質溫度zui高可達200℃）
壓力接口：G1/4內羅紋（可選配各類轉接頭,如M20×1.5外羅紋等）
電路接口：DIN插(cha)座

德魯克PTX1400負荷感測器器電(dian)磁閥選型方法流程： 
1． 產品型號 PMP1400 
2． 負擔的規模和實例 
3． 首選項：壓力值連接頭，如M20X1.5外羅紋 
相干借助： 煉油(you)廠、電力網、道軌、市政、 空調的使(shi)用冷(leng)庫、船(chuan)舶制造等 

 Performance Accuracy Combined non-linearity, hysteresis and repeatability: ±0.15% typical, ±0.25% maximum best straight line (BSL) definition Zero Offset and Span Setting Factory set to 0.5% FS, then ±5% site adjustable by sealed, non-interacting potentiometers Long Term Stability 0.2% FS range per annum typical Operating Temperature Range -4°F to 176°F (-20°C to 80°C) Temperature Effects • Total error band (TEB) 1.5% FS typical, 2% FS maximum, -4°F to 176°F (-20°C to 80°C) • For ranges below 6 psi (400 mbar) values increase pro-rata with calibrated span Physical Pressure Connection G 1/4 female Electrical Connection DIN 43650 plug supplied with mating socket Weight 0.4 lb (200 g) nominal Ingress Protection Sealed to IP65 CE marking CE marked for use in potentially explosive atmospheres, pressure equipment directive and electromagnetic compatibility GE Sensing Hazardous Area Certification PTX 1400 supplied Intrinsically Safe certified as standard, for use with barrier systems to: II 1G EEx ia IIC T4 (-20°;C Ta 80°C) ATEX directive 94/9/EC Certificate Baseefa 02ATEX0235X Options (B) Screw-in male/male adaptors with bonded seal G 1/4 male (P/N 190-040) 1/4 NPT male (P/N 190-038) 7/16 UNF male to MS 33656 (P/N 190-042) M14 x 1.5 male (P/N 190-036) G 1/2 (pressure gauge) (P/N 190-039) All adaptors 316 stainless steel construction (C) Vented cable for gauge pressure ranges 900 psi (60 bar) and below, the PTX/PMP 1400 requires vented cable (P/N 192-004). Specify required length on order (supplied unfitted). (D) Pressure snubber adaptor (DA0839-1-02) Screw in adaptor providing a G 1/4 female thread. Protects against unwanted fast transient pressure spikes. Refer to snubber product note for further detail. Ordering Information